Publish/Subscribe¶
Work in progress! This part will be a new chapter later.
TODO: write general PubSub introduction
The Publish/Subscribe (PubSub) extension for OPC UA enables fast and efficient 1:m communication. The PubSub extension is protocol agnostic and can be used with broker based protocols like MQTT and AMQP or brokerless implementations like UDP-Multicasting.
The PubSub API uses the following scheme:
- Create a configuration for the needed PubSub element.
- Call the add[element] function and pass in the configuration.
- The add[element] function returns the unique nodeId of the internally created element.
Take a look on the PubSub Tutorials for mor details about the API usage.:
+-----------+
| UA_Server |
+-----------+
| |
| |
| |
| | +----------------------+
| +--> UA_PubSubConnection | UA_Server_addPubSubConnection
| +----------------------+
| | |
| | | +----------------+
| | +----> UA_WriterGroup | UA_PubSubConnection_addWriterGroup
| | +----------------+
| | |
| | | +------------------+
| | +----> UA_DataSetWriter | UA_WriterGroup_addDataSetWriter +-+
| | +------------------+ |
| | |
| | +----------------+ | r
| +---------> UA_ReaderGroup | | e
| +----------------+ | f
| |
| +---------------------------+ |
+-------> UA_PubSubPublishedDataSet | UA_Server_addPublishedDataSet <-+
+---------------------------+
|
| +-----------------+
+----> UA_DataSetField | UA_PublishedDataSet_addDataSetField
+-----------------+
PubSub compile flags¶
- UA_ENABLE_PUBSUB
- Enable the experimental OPC UA PubSub support. The option will include the PubSub UDP multicast plugin. Disabled by default.
- UA_ENABLE_PUBSUB_DELTAFRAMES
- The PubSub messages differentiate between keyframe (all published values contained) and deltaframe (only changed values contained) messages. Deltaframe messages creation consumes some additional ressources and can be disabled with this flag. Disabled by default. Compile the human-readable name of the StatusCodes into the binary. Disabled by default.
- UA_ENABLE_PUBSUB_INFORMATIONMODEL
- Enable the information model representation of the PubSub configuration. For more details take a look at the following section PubSub Information Model Representation. Disabled by default.
PubSub Information Model Representation¶
The complete PubSub configuration is available inside the information model. The entry point is the node ‘PublishSubscribe, located under the Server node. The standard defines for PubSub no new Service set. The configuration can optionally done over methods inside the information model. The information model representation of the current PubSub configuration is generated automatically. This feature can enabled/disable by changing the UA_ENABLE_PUBSUB_INFORMATIONMODEL option.
Connections¶
The PubSub connections are the abstraction between the concrete transport protocol and the PubSub functionality. It is possible to create multiple connections with different transport protocols at runtime.
Take a look on the PubSub Tutorials for mor details about the API usage.
typedef enum {
UA_PUBSUB_PUBLISHERID_NUMERIC,
UA_PUBSUB_PUBLISHERID_STRING
} UA_PublisherIdType;
typedef struct {
UA_String name;
UA_Boolean enabled;
UA_PublisherIdType publisherIdType;
union { /* std: valid types UInt or String */
UA_UInt32 numeric;
UA_String string;
} publisherId;
UA_String transportProfileUri;
UA_Variant address;
size_t connectionPropertiesSize;
UA_KeyValuePair *connectionProperties;
UA_Variant connectionTransportSettings;
} UA_PubSubConnectionConfig;
UA_StatusCode
UA_Server_addPubSubConnection(UA_Server *server,
const UA_PubSubConnectionConfig *connectionConfig,
UA_NodeId *connectionIdentifier);
/* Returns a deep copy of the config */
UA_StatusCode
UA_Server_getPubSubConnectionConfig(UA_Server *server,
const UA_NodeId connection,
UA_PubSubConnectionConfig *config);
/* Remove Connection, identified by the NodeId. Deletion of Connection
* removes all contained WriterGroups and Writers. */
UA_StatusCode
UA_Server_removePubSubConnection(UA_Server *server, const UA_NodeId connection);
PublishedDataSets¶
The PublishedDataSets (PDS) are containers for the published information. The PDS contain the published variables and meta informations. The metadata is commonly autogenerated or given as constant argument as part of the template functions. The template functions are standard defined and intended for configuration tools. You should normally create a empty PDS and call the functions to add new fields.
/* The UA_PUBSUB_DATASET_PUBLISHEDITEMS has currently no additional members and
* thus no dedicated config structure. */
typedef enum {
UA_PUBSUB_DATASET_PUBLISHEDITEMS,
UA_PUBSUB_DATASET_PUBLISHEDEVENTS,
UA_PUBSUB_DATASET_PUBLISHEDITEMS_TEMPLATE,
UA_PUBSUB_DATASET_PUBLISHEDEVENTS_TEMPLATE,
} UA_PublishedDataSetType;
typedef struct {
UA_DataSetMetaDataType metaData;
size_t variablesToAddSize;
UA_PublishedVariableDataType *variablesToAdd;
} UA_PublishedDataItemsTemplateConfig;
typedef struct {
UA_NodeId eventNotfier;
UA_ContentFilter filter;
} UA_PublishedEventConfig;
typedef struct {
UA_DataSetMetaDataType metaData;
UA_NodeId eventNotfier;
size_t selectedFieldsSize;
UA_SimpleAttributeOperand *selectedFields;
UA_ContentFilter filter;
} UA_PublishedEventTemplateConfig;
/* Configuration structure for PublishedDataSet */
typedef struct {
UA_String name;
UA_PublishedDataSetType publishedDataSetType;
union {
/* The UA_PUBSUB_DATASET_PUBLISHEDITEMS has currently no additional members
* and thus no dedicated config structure.*/
UA_PublishedDataItemsTemplateConfig itemsTemplate;
UA_PublishedEventConfig event;
UA_PublishedEventTemplateConfig eventTemplate;
} config;
} UA_PublishedDataSetConfig;
void
UA_PublishedDataSetConfig_deleteMembers(UA_PublishedDataSetConfig *pdsConfig);
typedef struct {
UA_StatusCode addResult;
size_t fieldAddResultsSize;
UA_StatusCode *fieldAddResults;
UA_ConfigurationVersionDataType configurationVersion;
} UA_AddPublishedDataSetResult;
UA_AddPublishedDataSetResult
UA_Server_addPublishedDataSet(UA_Server *server,
const UA_PublishedDataSetConfig *publishedDataSetConfig,
UA_NodeId *pdsIdentifier);
/* Returns a deep copy of the config */
UA_StatusCode
UA_Server_getPublishedDataSetConfig(UA_Server *server, const UA_NodeId pds,
UA_PublishedDataSetConfig *config);
/* Remove PublishedDataSet, identified by the NodeId. Deletion of PDS removes
* all contained and linked PDS Fields. Connected WriterGroups will be also
* removed. */
UA_StatusCode
UA_Server_removePublishedDataSet(UA_Server *server, const UA_NodeId pds);
DataSetFields¶
The description of published variables is named DataSetField. Each DataSetField contains the selection of one information model node. The DataSetField has additional parameters for the publishing, sampling and error handling process.
typedef struct{
UA_ConfigurationVersionDataType configurationVersion;
UA_String fieldNameAlias;
UA_Boolean promotedField;
UA_PublishedVariableDataType publishParameters;
} UA_DataSetVariableConfig;
typedef enum {
UA_PUBSUB_DATASETFIELD_VARIABLE,
UA_PUBSUB_DATASETFIELD_EVENT
} UA_DataSetFieldType;
typedef struct {
UA_DataSetFieldType dataSetFieldType;
union {
/* events need other config later */
UA_DataSetVariableConfig variable;
} field;
} UA_DataSetFieldConfig;
void
UA_DataSetFieldConfig_deleteMembers(UA_DataSetFieldConfig *dataSetFieldConfig);
typedef struct {
UA_StatusCode result;
UA_ConfigurationVersionDataType configurationVersion;
} UA_DataSetFieldResult;
UA_DataSetFieldResult
UA_Server_addDataSetField(UA_Server *server,
const UA_NodeId publishedDataSet,
const UA_DataSetFieldConfig *fieldConfig,
UA_NodeId *fieldIdentifier);
/* Returns a deep copy of the config */
UA_StatusCode
UA_Server_getDataSetFieldConfig(UA_Server *server, const UA_NodeId dsf,
UA_DataSetFieldConfig *config);
UA_DataSetFieldResult
UA_Server_removeDataSetField(UA_Server *server, const UA_NodeId dsf);
WriterGroup¶
All WriterGroups are created within a PubSubConnection and automatically deleted if the connection is removed. The WriterGroup is primary used as container for DataSetWriter and network message settings. The WriterGroup can be imagined as producer of the network messages. The creation of network messages is controlled by parameters like the publish interval, which is e.g. contained in the WriterGroup.
typedef enum {
UA_PUBSUB_ENCODING_BINARY,
UA_PUBSUB_ENCODING_JSON,
UA_PUBSUB_ENCODING_UADP
} UA_PubSubEncodingType;
typedef struct {
UA_String name;
UA_Boolean enabled;
UA_UInt16 writerGroupId;
UA_Duration publishingInterval;
UA_Double keepAliveTime;
UA_Byte priority;
UA_MessageSecurityMode securityMode;
UA_ExtensionObject transportSettings;
UA_ExtensionObject messageSettings;
size_t groupPropertiesSize;
UA_KeyValuePair *groupProperties;
UA_PubSubEncodingType encodingMimeType;
/* non std. config parameter. maximum count of embedded DataSetMessage in
* one NetworkMessage */
UA_UInt16 maxEncapsulatedDataSetMessageCount;
} UA_WriterGroupConfig;
void
UA_WriterGroupConfig_deleteMembers(UA_WriterGroupConfig *writerGroupConfig);
/* Add a new WriterGroup to an existing Connection */
UA_StatusCode
UA_Server_addWriterGroup(UA_Server *server, const UA_NodeId connection,
const UA_WriterGroupConfig *writerGroupConfig,
UA_NodeId *writerGroupIdentifier);
/* Returns a deep copy of the config */
UA_StatusCode
UA_Server_getWriterGroupConfig(UA_Server *server, const UA_NodeId writerGroup,
UA_WriterGroupConfig *config);
UA_StatusCode
UA_Server_updateWriterGroupConfig(UA_Server *server, UA_NodeId writerGroupIdentifier,
const UA_WriterGroupConfig *config);
UA_StatusCode
UA_Server_removeWriterGroup(UA_Server *server, const UA_NodeId writerGroup);
DataSetWriter¶
The DataSetWriters are the glue between the WriterGroups and the PublishedDataSets. The DataSetWriter contain configuration parameters and flags which influence the creation of DataSet messages. These messages are encapsulated inside the network message. The DataSetWriter must be linked with an existing PublishedDataSet and be contained within a WriterGroup.
typedef struct {
UA_String name;
UA_UInt16 dataSetWriterId;
UA_DataSetFieldContentMask dataSetFieldContentMask;
UA_UInt32 keyFrameCount;
UA_ExtensionObject messageSettings;
UA_String dataSetName;
size_t dataSetWriterPropertiesSize;
UA_KeyValuePair *dataSetWriterProperties;
} UA_DataSetWriterConfig;
void
UA_DataSetWriterConfig_deleteMembers(UA_DataSetWriterConfig *pdsConfig);
/* Add a new DataSetWriter to a existing WriterGroup. The DataSetWriter must be
* coupled with a PublishedDataSet on creation.
*
* Part 14, 7.1.5.2.1 defines: The link between the PublishedDataSet and
* DataSetWriter shall be created when an instance of the DataSetWriterType is
* created. */
UA_StatusCode
UA_Server_addDataSetWriter(UA_Server *server,
const UA_NodeId writerGroup, const UA_NodeId dataSet,
const UA_DataSetWriterConfig *dataSetWriterConfig,
UA_NodeId *writerIdentifier);
/* Returns a deep copy of the config */
UA_StatusCode
UA_Server_getDataSetWriterConfig(UA_Server *server, const UA_NodeId dsw,
UA_DataSetWriterConfig *config);
UA_StatusCode
UA_Server_removeDataSetWriter(UA_Server *server, const UA_NodeId dsw);
DataSetReader¶
DataSetReader can receive NetworkMessages with the DataSet of interest sent by the Publisher. DataSetReaders represent the configuration necessary to receive and process DataSetMessages on the Subscriber side
/* Parameters for PubSubSecurity */
typedef struct {
UA_Int32 securityMode; /* placeholder datatype 'MessageSecurityMode' */
UA_String securityGroupId;
size_t keyServersSize;
UA_Int32 *keyServers;
} UA_PubSubSecurityParameters;
/* Parameters for PubSub DataSetReader Configuration */
typedef struct {
UA_String name;
UA_Variant publisherId;
UA_UInt16 writerGroupId;
UA_UInt16 dataSetWriterId;
UA_DataSetMetaDataType dataSetMetaData;
UA_DataSetFieldContentMask dataSetFieldContentMask;
UA_Double messageReceiveTimeout;
UA_PubSubSecurityParameters securityParameters;
UA_UadpDataSetReaderMessageDataType messageSettings;
UA_TargetVariablesDataType subscribedDataSetTarget;
} UA_DataSetReaderConfig;
/* Update configuration to the dataSetReader */
UA_StatusCode
UA_Server_DataSetReader_updateConfig(UA_Server *server, UA_NodeId dataSetReaderIdentifier,
UA_NodeId readerGroupIdentifier, const UA_DataSetReaderConfig *config);
/* Get configuration of the dataSetReader */
UA_StatusCode
UA_Server_DataSetReader_getConfig(UA_Server *server, UA_NodeId dataSetReaderIdentifier,
UA_DataSetReaderConfig *config);
/* Return Status Code after creating TargetVariables in Subscriber AddressSpace
* TargetVariables define a list of variable mappings between received DataSet fields
* and the TargetVariables in the Subscriber AddressSpace */
UA_StatusCode
UA_Server_DataSetReader_createTargetVariables(UA_Server *server, UA_NodeId dataSetReaderIdentifier,
UA_TargetVariablesDataType* targetVariables);
/* To Do:Implementation of SubscribedDataSetMirrorType
* UA_StatusCode
* A_PubSubDataSetReader_createDataSetMirror(UA_Server *server, UA_NodeId dataSetReaderIdentifier,
* UA_SubscribedDataSetMirrorDataType* mirror) */
ReaderGroup¶
All ReaderGroups are created within a PubSubConnection and automatically deleted if the connection is removed.
/* ReaderGroup configuration */
typedef struct {
UA_String name;
UA_PubSubSecurityParameters securityParameters;
} UA_ReaderGroupConfig;
/* Add DataSetReader to the ReaderGroup */
UA_StatusCode
UA_Server_addDataSetReader(UA_Server *server, UA_NodeId readerGroupIdentifier,
const UA_DataSetReaderConfig *dataSetReaderConfig,
UA_NodeId *readerIdentifier);
/* Remove DataSetReader from ReaderGroup */
UA_StatusCode
UA_Server_removeDataSetReader(UA_Server *server, UA_NodeId readerIdentifier);
/* To Do: Update Configuration of ReaderGroup */
UA_StatusCode
UA_Server_ReaderGroup_updateConfig(UA_Server *server, UA_NodeId readerGroupIdentifier,
const UA_ReaderGroupConfig *config);
/* Get configuraiton of ReaderGroup */
UA_StatusCode
UA_Server_ReaderGroup_getConfig(UA_Server *server, UA_NodeId readerGroupIdentifier,
UA_ReaderGroupConfig *config);
/* Add ReaderGroup to the created connection */
UA_StatusCode
UA_Server_addReaderGroup(UA_Server *server, UA_NodeId connectionIdentifier,
const UA_ReaderGroupConfig *readerGroupConfig,
UA_NodeId *readerGroupIdentifier);
/* Remove ReaderGroup from connection */
UA_StatusCode
UA_Server_removeReaderGroup(UA_Server *server, UA_NodeId groupIdentifier);
#endif /* UA_ENABLE_PUBSUB */